Cleaning Tips

Before You Start

• Inspect the machine: Check squeegee, brush/pad, and recovery tanks.
• Choose the right pad/brush: Soft for smooth floors, medium/hard for rough or heavily soiled surfaces.
• Fill solution tank with recommended cleaner. Never add bleach or highly acidic/alkaline chemicals directly into the tank - apply them manually if needed on tough spots.

During Cleaning

• Adjust water and pressure settings according to floor type.
• Move at a steady pace to allow proper cleaning.
• Overlap passes slightly to avoid uncleaned lines.
• Monitor the squeegee for a dry finish; clean/adjust if needed.
• Spot treat stubborn areas manually if necessary.

After Cleaning

• Empty and rinse solution and recovery tanks.
• Clean brushes/pads and remove debris.
• Recharge the battery immediately.
• Leave recovery tank lid open to air dry.
• Wipe down the exterior of the machine.